Alloy information - Comparison Table
| Paliney 5 | Paliney 6 | Paliney 7 | Paliney 8 | Paliney 9 | NeyOro G | NeyOro-28 | Paliney-2000 | |
|---|---|---|---|---|---|---|---|---|
| Major Elements | Ag | Pd | Pd | Pd | Pd | Au | Au | Ag |
| Pd | Ag | Ag | Ag | Ag | Cu | Ag | Pd | |
| Cu | Cu | Cu | Cu | Cu | Pt | Cu | ||
| Pt | Pt | |||||||
| Au | Au | |||||||
| Available Condition | A, SR, HT | A, SR, HT | A, SR, | A, DHT, HT | SR | A, SR, HT | A, WH, SR | A, WH, SR, HT |
| DHT, HT | ||||||||
| Typical Applications | Potentiometers | Automotive | Aerospace | Potentiometers | Communications | Professional | Potentiometers | Potentiometers T |
| Sensors | Potentiometers | IC Test | Military | Relays | Video Cameras | Slip Rings | Position Sensors | |
| Instrumentation | Position Sensors | Contactors | Arm Circuits | Gyro Gimbals | ||||
| Medical | Munition Safe | |||||||
| Communications | Medical Ultrasound Sensors | |||||||
| Strain Gauges | ||||||||
| Properties (Typical) | Heat-Treated | Heat-Treated | Heat-Treated | Heat-Treated | Stress-Relieved | Heat-Treated | Work-Hardened | Heat-Treated |
| Proportional Limit (psi) | 110,000 | 120,000 | 145,000 | 155,000 | 120,000 | 130,000 | 50,000 | 120,000 |
| Ultimate Tensile Strength (psi) | 150,000 | 175,000 | 180,000 | 210,000 | 150,000 | 170,000 | 70,000 | 185,000 |
| Elongation (%) | 1 - 5 | 6 | 5 | 1 | 12 | 5 | 1 - 10 | < 5 |
| Modulus of Elasticity (psi) | 16.5 x 10(6) | 16.5 x 10(6) | 17.0 x 10(6) | 16.0 x 10(6) | 17.0 x 10(6) | 16.0 x 10(6) | 12 x 10(6) | 15.5 x 10(6) |
| Vickers Hardness (50-gram) | 260 - 320 | 290 - 370 | 330 - 400 | 340 - 440 | 275 - 340 | 290 - 370 | 150-205 | 300-350 |
| Oxidation Resistance | Good | Very Good | Very Good | Good | Very Good | Excellent | Excellent | Very Good |
|
A = Annealed WH = Work-Hardened SR = Stress-Relieved The above information represents typical properties and can vary based on alloy conditioning and configuration. The information is intended to assist in the use of these products. It is not intended to and does not create any warranties, express or implied including any warranty of merchantability or fitness for a particular application. The user should determine the suitability of a specific material for each application. |