Wire/Strip Size & Tolerance Table

The information listed below will provide you with a general overview of tolerance capabilities for both wire and strip products.  For special tolerances or more detailed assistance, please contact us to discuss your requirements with one of our metallurgists.

View Properties Table

Diameter Range and Tolerances - Wire Thickness Range and Tolerances - Strip
(Inches) (Millimeters) (Inches) (Milimeters)
.00075 to .0029     +- .0001 .019 to .075     +- .0025 .0005 to .00149     +- .0001 .0127 to .0378     +- .0025
.003 to .030     +- .0002 .076 to .762     +- .0050 .0015 to .0050     +- .0002 .038 to .127     +- .0050
.0301 to .050     +- .0003 .765 to 1.27     +- .0076 .0051 to .0100     +- .0003 .130 to .254     +- .0076
.0501 to .095     +- .0005 1.273 to 2.41     +- .0130 .0101 to .0150     +- .0006 .256 to .381     +- .0152
.0951 to .125     +- .001 2.42 to 3.17     +- .0254 .0151 to .0250     +- .001 .383 to .635     +- .0254
.1251 to .200     +- .0025 3.18 to 5.08     +- .0635    
.2001 to .250 +- .005 5.083 to 6.35 +- .1270    

* Heavier gauges available upon request

The information contained in this Data Sheet is intended to assist you in the use of this product. It is not intended to and does not create any warranties, express or implied, including any warranty of merchantability or fitness for a particular application. The user should determine the suitability of this material for each application. Data is subject to change without notice.

For More Information

Contact Us to discuss your application with one of our Materials Specialists.